AE246 Eaton Aeroquip High Pressure Hose AS1339

Hose	ID	OD	Max Oper PSI	Min Burst PSI	Min Bend	Weight
AE246-4	.212	.385	3000	16000	1.5	.108
AE246-6	.298	.480	3000	14000	2.5	.147
AE246-8	.391	.610	3000	14000	2.88	.240
AE246-10	.485	.715	3000	12000	3.25	.320
AE246-12	.602	.888	3000	12000	3.88	.509

Sizes in Inches, Weight in pounds. Min burst at room temperature.

AE246-12 meets the performance requirements of AS13339 but not the O.K. dimension of AS1339 (The O.D. is dimensionally smaller)

Construction:
     Inner Tube: PTFE inner tube
     Reinforcement & Outer Cover: 
     AE246 has 2 braids of Type 300 Series stainless steel woven wire braid which acts as it's reinforcement and cover. Braid reinforcement is Eaton Aeroquip's advanced technology Hi-Pac(r) brad reinforcement which offers:

• Up to 50% lighter in weight
• Considerably smaller envelope size
• 50% tighter bend radius
• Improved flexing characteristics
• Proven high performance
• Proven 'Super-C' crimped fittings

Operating Temperatures:
     -67 F to +400 F
     -55 C to +204C

Identification:

Identification bands showing specification number, manufacturers code number, operating pressure, assembly date and other required information.

Application in High Pressure and High-Temperature Service:

Eaton's PTFE hose is unaffected by fuels, lube oils, coolants or solvents commonly used in aircraft applications. Superior vibration resistance, low volumetric expansion, and high-temperature resistance make it ideal for hydraulic systems. 

Conductivity:

The product line of AE246 hose has a PTFE tube, which is designed to eliminate electrostatically induced hose failures. The tube is capable of conducting a direct current equal to or greater than 6 micro-amps in sizes -4, -6, -8 ; 12 microamps in -10 and size and up, with a potential of 1,000 volts.

AE246 hose is recommended for normal 3000 psi hydraulic systems with impulse peaks up to 4500 psi.